dmesg - Nouveau Gallium3D NV43
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-999-generic (apw@gomeisa) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #201204210452 SMP Sat Apr 21 08:53:45 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: MSI MS-7593/MSI X58M (MS-7593), BIOS V3.8 04/01/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BF800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 1fffd000-20000000
RAMDISK: 364b0000 - 37250000
ACPI: RSDP 00000000000fa000 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00038 (v01 7593MS A7593300 20110401 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 7593MS A7593300 20110401 MSFT 00000097)
ACPI: DSDT 00000000bf780480 06FF8 (v01 A7593 A7593300 00000300 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 000AC (v01 7593MS A7593300 20110401 MSFT 00000097)
ACPI: MCFG 00000000bf780440 0003C (v01 7593MS OEMMCFG 20110401 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 0007A (v01 7593MS A7593300 20110401 MSFT 00000097)
ACPI: SSDT 00000000bf791d50 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf780000
Initmem setup node 0 0000000000000000-00000000bf780000
NODE_DATA [00000000bf77c000 - 00000000bf77ffff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf780
On node 0 totalpages: 784142
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 767970 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s83072 r8192 d23424 u131072
pcpu-alloc: s83072 r8192 d23424 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 771883
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3056304k/3137024k available (6621k kernel code, 456k absent, 80264k reserved, 6532k data, 916k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:776 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration failed
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3475.290 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6950.58 BogoMIPS (lpj=13901160)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25566 entries in 100 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU X 990 @ 3.47GHz stepping 02
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog: enabled, takes one hw-pmu counter.
#2
NMI watchdog: enabled, takes one hw-pmu counter.
#3
NMI watchdog: enabled, takes one hw-pmu counter.
#4
NMI watchdog: enabled, takes one hw-pmu counter.
#5
NMI watchdog: enabled, takes one hw-pmu counter.
#6
NMI watchdog: enabled, takes one hw-pmu counter.
#7
NMI watchdog: enabled, takes one hw-pmu counter.
#8
NMI watchdog: enabled, takes one hw-pmu counter.
#9
NMI watchdog: enabled, takes one hw-pmu counter.
#10
NMI watchdog: enabled, takes one hw-pmu counter.
#11 Ok.
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 12 CPUs
Total of 12 processors activated (83406.96 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
dummy:
RTC time: 14:50:38, date: 04/21/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf78e0c0 03C90 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 03C90 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf3ffe000-0xf3ffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf3ffc000-0xf3ffc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
pci 0000:00:1f.2: reg 20: [io 0xa480-0xa49f]
pci 0000:00:1f.2: reg 24: [mem 0xf3ff6000-0xf3ff67ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3ff5c00-0xf3ff5cff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [10de:0140] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf7ffffff]
pci 0000:02:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfaffffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfbbe0000-0xfbbfffff pref]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [mem 0xf4000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
pci 0000:05:00.0: reg 24: [mem 0xfbcffc00-0xfbcffdff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:0368] type 00 class 0x010185
pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 20: [mem 0xf2ff0000-0xf2ffffff 64bit pref]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci 0000:07:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:07:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit]
pci 0000:07:00.0: reg 18: [io 0xe800-0xe8ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:ff:00.0: [8086:2c71] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] has been reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0a00-0x0adf]
pnp 00:06: [io 0x0ae0-0x0aef]
system 00:06: [io 0x0a00-0x0adf] has been reserved
system 00:06: [io 0x0ae0-0x0aef] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x002d]
pnp 00:07: [io 0x0030-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed10000-0xfed103ff]
pnp 00:07: [mem 0xfed10400-0xfed107ff]
pnp 00:07: [mem 0xfed10800-0xfed10bff]
pnp 00:07: [mem 0xfed10c00-0xfed10fff]
pnp 00:07: [mem 0xfec8a000-0xfec8a3ff]
pnp 00:07: [mem 0xfec8a400-0xfec8a7ff]
pnp 00:07: [mem 0xfec8a800-0xfec8abff]
pnp 00:07: [mem 0xfec8ac00-0xfec8afff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed45000-0xfed89fff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed103ff] has been reserved
system 00:07: [mem 0xfed10400-0xfed107ff] has been reserved
system 00:07: [mem 0xfed10800-0xfed10bff] has been reserved
system 00:07: [mem 0xfed10c00-0xfed10fff] has been reserved
system 00:07: [mem 0xfec8a000-0xfec8a3ff] has been reserved
system 00:07: [mem 0xfec8a400-0xfec8a7ff] has been reserved
system 00:07: [mem 0xfec8a800-0xfec8abff] has been reserved
system 00:07: [mem 0xfec8ac00-0xfec8afff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xe0000000-0xefffffff]
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x000c0000-0x000cffff]
pnp 00:0a: [mem 0x000e0000-0x000fffff]
pnp 00:0a: [mem 0x00100000-0xbfffffff]
pnp 00:0a: [mem 0xfed90000-0xffffffff]
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [mem 0xf4000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbbfffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13952k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1335019838.476:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.18)
msgmni has been set to 5996
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 56k, total 64k
efifb: mode is 640x350x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x43
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata2: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6100 irq 44
ata3: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6180 irq 44
ata4: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6200 irq 44
ata5: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6280 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6300 irq 44
ata7: SATA max UDMA/133 abar m2048@0xf3ff6000 port 0xf3ff6380 irq 44
ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata8: SATA max UDMA/133 abar m512@0xfbcffc00 port 0xfbcffd00 irq 17
ata9: SATA max UDMA/133 abar m512@0xfbcffc00 port 0xfbcffd80 irq 17
pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3ffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3ffc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:836:839
rtc_cmos 00:03: setting system clock to 2012-04-21 14:50:39 UTC (1335019839)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
hub 1-0:1.0: unable to enumerate USB device on port 6
usb 5-1: new low-speed USB device number 2 using uhci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
ata3.00: 312581808 sectors, multi 0: LBA48
ata3.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1600JS-00M 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 3475.289 MHz.
Switching to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
ata5.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 916k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1552k freed
Freeing unused kernel memory: 1192k freed
udevd[152]: starting version 175
scsi8 : pata_jmicron
scsi9 : pata_jmicron
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ata10: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18
ata11: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18
r8169 0000:06:00.0: irq 45 for MSI/MSI-X
r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc9000064e000, 6c:62:6d:47:5b:86, XID 1c4000c0 IRQ 45
r8169 0000:06:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:047D:2043.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1a.2-1/input0
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
generic-usb 0003:047D:2043.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1a.2-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 5-2: new full-speed USB device number 3 using uhci_hcd
firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4
generic-usb 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.2-2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input5
generic-usb 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.2-2/input1
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512708
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512713
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512709
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512273
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512707
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5512706
EXT4-fs (sda1): 6 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
firewire_core 0000:07:00.0: created device fw0: GUID 0010dc0001ceffed, S400
init: ureadahead main process (336) terminated with status 5
Adding 3134460k swap on /dev/sda5. Priority:-1 extents:1 across:3134460k
udevd[411]: starting version 175
lp: driver loaded but no devices found
microcode: CPU0 sig=0x206c2, pf=0x2, revision=0x13
EDAC MC: Ver: 2.1.0
microcode: CPU1 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU2 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU3 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU4 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU5 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU6 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU7 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU8 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU9 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU10 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU11 sig=0x206c2, pf=0x2, revision=0x13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c70
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
VGA switcheroo: detected Optimus DSM method \ handle
[drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x043000a2)
checking generic (a0000 e000) vs hw (d8000000 8000000)
checking generic (a0000 e000) vs hw (fa000000 1000000)
fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 05.43.02.16
[drm] nouveau 0000:02:00.0: TMDS table version 1.1
[drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:02:00.0: DCB version 3.0
[drm] nouveau 0000:02:00.0: DCB outp 00: 01000300 00000028
[drm] nouveau 0000:02:00.0: DCB outp 01: 04010312 00000000
[drm] nouveau 0000:02:00.0: DCB outp 02: 04010310 00000028
[drm] nouveau 0000:02:00.0: DCB outp 03: 02020321 0000c080
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xECC9
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xF081
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xF4E1
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xF669
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xF72D
[TTM] Zone kernel: Available graphics memory: 1536958 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:02:00.0: Detected 128MiB VRAM (GDDR3)
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
type=1400 audit(1335019849.118:2): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=858 comm="apparmor_parser" name="/sbin/dhclient" offset=124
type=1400 audit(1335019849.118:3): apparmor="STATUS" operation="profile_replace" pid=858 comm="apparmor_parser"
type=1400 audit(1335019849.122:4): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=702 comm="apparmor_parser" name="/sbin/dhclient" offset=124
type=1400 audit(1335019849.122:5): apparmor="STATUS" operation="profile_replace" pid=702 comm="apparmor_parser"
[drm] nouveau 0000:02:00.0: Detected monitoring device: max6646
[drm] nouveau 0000:02:00.0: 2 available performance level(s)
[drm] nouveau 0000:02:00.0: 0: core 500MHz shader 500MHz memory 1000MHz voltage 1300mV fanspeed 100%
[drm] nouveau 0000:02:00.0: 1: core 500MHz shader 500MHz memory 1000MHz voltage 1400mV fanspeed 100%
[drm] nouveau 0000:02:00.0: c: core 299MHz shader 299MHz memory 598MHz voltage 1200mV fanspeed 100%
[drm] nouveau 0000:02:00.0: 0xD27C: Parsing digital output script table
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 2)
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:02:00.0: allocated 1920x1080 fb: 0x49000, bo ffff8800b671e400
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:02:00.0: 0xD283: Parsing digital output script table
[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output C
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
init: failsafe main process (920) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1335019853.578:6): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=1023 comm="apparmor_parser" name="/usr/lib/cups/backend/cups-pdf" offset=140
type=1400 audit(1335019853.578:7): apparmor="STATUS" operation="profile_replace" pid=1023 comm="apparmor_parser"
init: cups pre-start process (984) terminated with status 234
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1335019853.938:8): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=1065 comm="apparmor_parser" name="/usr/bin/evince" offset=125
type=1400 audit(1335019853.938:9): apparmor="STATUS" operation="profile_replace" pid=1065 comm="apparmor_parser"
type=1400 audit(1335019853.942:10): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=1065 comm="apparmor_parser" name="/usr/bin/evince//launchpad_integration" offset=148
type=1400 audit(1335019853.942:11): apparmor="STATUS" operation="profile_replace" pid=1065 comm="apparmor_parser"
r8169 0000:06:00.0: eth0: link down
r8169 0000:06:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 42 callbacks suppressed
type=1400 audit(1335019854.214:26): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=1068 comm="apparmor_parser" name="/usr/lib/cups/backend/cups-pdf" offset=140
type=1400 audit(1335019854.214:27): apparmor="STATUS" operation="profile_replace" pid=1068 comm="apparmor_parser"
type=1400 audit(1335019854.322:28): apparmor="STATUS" info="failed to unpack profile" error=-71 pid=1067 comm="apparmor_parser" name="/usr/lib/telepathy/mission-control-5" offset=146
type=1400 audit(1335019854.322:29): apparmor="STATUS" operation="profile_replace" pid=1067 comm="apparmor_parser"
r8169 0000:06:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1425) terminated with status 1
eth0: no IPv6 routers present
[drm] nouveau 0000:02:00.0: fail ttm_validate
[drm] nouveau 0000:02:00.0: validate vram_list
[drm] nouveau 0000:02:00.0: validate: -12
[drm] nouveau 0000:02:00.0: fail ttm_validate
[drm] nouveau 0000:02:00.0: validate vram_list
[drm] nouveau 0000:02:00.0: validate: -12
[drm] nouveau 0000:02:00.0: setting performance level: 1
[drm] nouveau 0000:02:00.0: > reclocking took 7750560ns
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: 0xD283: Parsing digital output script table
[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output C
[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: 0xD283: Parsing digital output script table
[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output C